APRS 51TNC2

$98.00

 

 

Work with VHF/UHF as APRS digipeater.

 

Download Firmware 

Firmware update instruction

PC Client for 51TNC

Out of stock

Category:

Description

Support for multiple servers
Support WIFI touch LCD
Support weather station
Support network remote settings
Support firmware upgrade
Independent operation from the computer, access to the network without replacing the router
Integrated gateway, digital trunk, weather station, remote control and many other functions and interfaces
Codec is efficient and stable
Small size, micro power consumption
Easy to use, easy to install and wire, plug and play
Don’t keep on the computer all the time. Don’t change the H618B router. Don’t install the APRS4R system. Don’t look at the German garbled.
Don’t be afraid to set up a mess. . . . .
  Simply put, this is the APRS gateway digital trunk weather station all-in-one TNC interface box. No need to replace the H618B router, no need to install the APRS4R system, save the trouble of changing the router, the default plug-in power, radio, network cable, simple configuration call sign can be used.

Embedded APRS Network 51TNC

Independent operation from the computer, access to the network without replacing the router
Integrated gateway, digital trunk, weather station, remote control and many other functions and interfaces
Codec is efficient and stable
Small size, micro power consumption
Easy to use, easy to install and wire, plug and play

Radio RF codec feature

* Data encoding and decoding transceiver timing standards are accurate
*Long tone detection, continuous decoding technology
* Data level upper and lower edge synchronous decoding technology can be adaptive to the transmitter side clock frequency drift, timing instability, etc., improve decoding rate
* Standard APRSKISS communication protocol and complete data verification, standard 1200RF modulation rate
*9600 communication rate, two-way transceiver
* Support custom packet FLAG before and after to sign efficiency, minimum interval of adjacent packets

Digital repeater

Support WIDE1\\WIDE2 relay forwarding
Support for custom relay name forwarding

Gateway

Support gateway RF, IS beacon
Beacon RF, IS2 time set separately

Weather station

Support weather station RF, IS beacon
Beacon RF, IS2 time set separately
Support internal to BOSS air pressure film (optional)
Support DTH11 temperature and humidity difference sensor (optional)
Support for sensor expansion

Network characteristics

10M/100M adaptive high speed hardware network core
Support network multi-state detection
Support 3 sets of optional servers
Support server PING online detection
Support port number jump connection
Support disconnection reconnection
Document registration verification

Other

Parameter power-down memory
Support ISP firmware upgrade, no power loss download
Client quick setup
Support rate port LCD monitoring
The initial default IP of this machine: 192.168.1.120
For the first time, through the supporting client software, link 192.168.1.120, fill in your own call sign, password
Yes, other settings are modified as needed.
Note: The computer and TNC must be on the same network segment address to log in.

Brief introduction of functions:

*3.3V low-voltage high-speed large-capacity 51CPU + imported FX604 modulation and demodulation chip integrated hard solution
* 100M network interface, imported full hardware high-speed network IC, reliable and stable communication
* Standard APRS KISS communication protocol and complete data verification, 1200 modulation rate
* 9600 communication rate, two-way transceiver
* Independent program, support ISP firmware upgrade
* Support network beacons, weather station beacons, radio beacons
*7-15V working voltage (optional 7-35V wide power input), anti-reverse protection, overvoltage protection
*Support network client software setting parameters, Chinese interface, intuitive and convenient
Open ISP upgrade interface, firmware upgrades
************************************************** ************************************

Standard list of online TNC kits:

* 1pcs DATA (PS/2 6-pin)line, supporting FT-7800\7900\8800\8900, IC-2720\2820, etc.
* 1pcs 9V power supply, 1pcs USB firmware download data cable

 

T2HGmjXmtbXXXXXXXX_!!10318019

Standard shipping: Host, power supply, network cable, DATA line

Basic hardware features:

Operating voltage: 8-15V, optional 8-35V wide power input reverse power supply protection
Micro power consumption: 12V / 0.1A 1W Size: 24*69*100 mm
3.3V low voltage CPU STC12LE5A60S2 60K
100M adaptive high speed hardware network IC fully isolated RJ45 network socket
Imported FX604 hardware modulation and demodulation circuit Coded modulation output level optional
Built-in YAESU hand station PTT trigger mode Support Bluetooth module
TTL/RS232C serial level conversion circuit

Reviews

There are no reviews yet.

Be the first to review “APRS 51TNC2”

Your email address will not be published. Required fields are marked *